2016 - Thegsmsolution

Thegsmsolution

Develop skill on mobile repairing & Latest Database of Android Firmware.

Latest

Saturday, December 31, 2016

Falcon Box Free Qualcomm Module V1.1 [Xmas Edition] For all falcon user

12:30:00 PM 0
News

Falcon Box 
Next Generation Mobile Tool
Innovated BY MIRACLE TEAM
XMAS SPECIAL EDITION (25th Dec 2016)



Thanks for update Miracle Team  “Falcon Box & Falcon Miracle Key Edition”
To make the Better Mobile Repair Solution for you, this team bring to the Updates regularly.
Every Update of our software include improvements for new functions and better service
and reliability.

Introducing Free Qualcomm Service Module


Free for All Users (Falcon Box / Miracle Key Activated for Falcon)


Qualcomm Flashing Tool

Write RawFirmware
- Download Mode Mode (2 Methods)
Write RawFirmware in
- Fastboot Mode

List All Partitions
Read Firmware
Manually Dump Any Partition
Manually Dump Full Firmware
Manually Dump Based on Size
Auto Make Raw xml

Format
List All Partitions
Wipe Any Single Partition
Wipe Full Rom
Manual Format
Manual Format By Size
Factory Reset
Remove Account Lock
- Universal Qualcomm Method
Most Brands like Lyf,Archos,Bq,wiko etc
- Xiaomi Method (For Xiaomi Devices)

Custom Flasher
- Flash Any Custom Image without Full Flash
- Flash Any Partition without Full Flash

Auto/Manual Firehose Selection
Auto/Manual Port Detection

Qualcomm MSM 8210
Qualcomm MSM 8212
Qualcomm MSM 8610
Qualcomm MSM 8612
Qualcomm MSM 8626
Qualcomm MSM 8909
Qualcomm MSM 8916
Qualcomm MSM 8926
Qualcomm MSM 8936
Qualcomm MSM 8937
Qualcomm MSM 8976
Qualcomm MSM 8992
Qualcomm MSM 8994
Qualcomm MSM 8996
Universal Bq Method
Universal Lenovo Method
Universal Lyf Method
Universal Qmobile Method
Universal Qualcomm Method
Universal Vivo Method
Universal Wiko Method
Universal Xiaomi Method
Universal Xolo Method
Universal Archos Method

Read Information
- Normal Mode
- Fastboot Mode
- Diag Mode

Network Unlock
Read Codes
Direct Unlock
- Old Security Method
- New Security Method
- Support Most Models

Efs Tool
Read Efs
Write Efs
Reset Efs

Qcn Tool
Read Qcn
Write Qcn

Misc
Enable Diag
Remove Account Locks
- Normal Mode
- Fastboot Mode
Factory Reset
- Normal Mode
- Fastboot Mode
Bootloader Lock
Bootloader Unlock

Repair
Repair Imei 1 (Most Qualcomm Models Supported)
Repair Imei 2 (Most Qualcomm Models Supported)
Repair Meid (Most Qualcomm Models Supported)
Repair Esn (Most Qualcomm Models Supported)
Repair Spc (Most Qualcomm Models Supported)

- 3 Different Methods (EFS/NV/NEW SECURITY)
- Use Method 3 for Newer Devices
- Most Qualcomm Models Supported

Other
Added 40+ Internal Skins (With Save option in settings)


Download setup



http://www.mediafire.com/file/5d710ldn8bate6e/FQM.exe













Thanks Falcon Team here.
Read More

Friday, December 30, 2016

New Year gift for old RIFF Box users by riff team

6:21:00 PM 1
Hello dear members and RIFF Box users !


Riff team have decided to give all RIFF Box v1 users opportunity to install new firmware and software and enjoy full functionality of upgraded RIFF Box v1, including eMMC access and latest Box Firmwares and DLL-s.

My old box now alive




Q's&A's :

What do I need to do now ?
Download and install latest JTAG Manager (To a new folder) and simply enter Your login details when asked.
My account is expired, am I eligible for this ?
Yes !
How long I can use this after activation and firmware upgrade ?
As long as You keep RIFF Directory intact (eg, not format drive or download new files)
How long I will have access to licensing Server ?
Two weeks (14 days). After this period You still can use all features, but You will not be able to download license for new files.
I can't remember my login details

Please read this.

Read More

SAMSUNG TOOL PRO 27.7 LATEST UPDATE RELEASE

12:38:00 PM 0
Samsung Tool Pro 27.7. Last 2016 year latest update and New year Update

The last update of 2016 year.
We hope all users are so happy from our job and updates this year.

Next year we will have also lot of exclusive and hot updates.


Added:

- support SM-T587P (Flash, Unlock(TEST), Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)
- support SM-T560NU (Flash, Read/Write EFS, Reset FRP)

- support SM-J320W8 (Flash, Read/Write EFS, Read/Write CERT, Unlock, Read codes, repair, patch cert) - first world
- support M-G530T1 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)
- support SC-01G (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)

- support SM-C9000 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP, Unlock via MSL(if you have msl code))
- support SM-G5510 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Unlock via MSL(if you have msl code))
- support SM-G5520 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Unlock via MSL(if you have msl code))

- support SM-C5000 (unlock via msl code(if you have msl code))
- support SM-C7000 (unlock via msl code(if you have msl code))
- support SM-J320N0 (unlock via msl code(if you have msl code))
- support SM-J320Y (unlock via msl code(if you have msl code))
- support SM-J320YZ (unlock via msl code(if you have msl code))
- support SM-J320ZN (unlock via msl code(if you have msl code))

Improved:
- write NV data algo - now without auto reboot after write
- repair S6 (G920x, G925x...) algo: now will ask if HMAC mismatch.
If you have Security damaged error -write NV data from working phone and then without reboot - do phone phone repair

Fixed:
- patch CERT error(4 8) on J120x A310F
- SM-J700T, SM-J700T1, Unlock, Read/Write CERT
Read More

SAMSUNG G530T UNLOCKING & INSTRUCTION HERE

12:02:00 PM 1
Samsung G530T provide by T-mobile unlocking detailed info and log here.

Here the log is:-

Platform: Samsung Android
Selected port: COM83
Selected model: SM-G530FZ
Detected phone model: SM-G530T
Firmware compiled date: Wed Jul 13 20:15:16 KST 2016
PDA version: G530TUVU1APG1
CSC version: G530TTMB1APG1
SW version: G530TUVU1APG1
Phone SN: R28GC3TX2LB
Android version: 5.1.1 (LMY47X)
Sales code: TMB
Country: USA
HW platform: msm8916
HW Chip: MSM8916
HW Modem: MSM8916
Security patch level: 2016-07-01
Codename: gprimeltetmo
Checking Root:
Phone is Rooted.
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.

Performed by 2.4.7 Software version.

Here the instruction is:-

To connect SM-G530H phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.

Must know:-
  • Phone must be rooted.
  • Don`t forget to select model as G530FZ.
  • Battery must be 50% over charged.
  • Install driver properly.
  • Read code function still not working at this model.So use only press unlock bottom.




Stay with for further update.


Read More

Wednesday, December 28, 2016

COLORS E15 FIRMWARE & INSTRUCTION HERE

2:30:00 PM 0
Colors E15 firmware download first in the world for free .


Below you can get the direct link to download the Colors E15 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .



How to flash

1-Download and extract the stock firmware on your computer.This rar file is  password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

Colors P50 Firmware Flash file (Stock Rom) FREE

2:25:00 PM 0
Colors P50 firmware download first in the world for free .


Below you can get the direct link to download the Colors P50 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .



How to flash

1-Download and extract the stock firmware on your computer.This rar file is  password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

Tuesday, December 27, 2016

SAMSUNG SGH-T259 UNLOCKING INSTRUCTION

4:51:00 PM 0
Samsung SGH-T259 unlocking process with log here.

Here the log is:-

Selected model: T259
Selected com port: COM99
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Phone in TAT MODE
Phone IMEI: 35231904569***
Phone SW: A667UCKG4
Phone BT ADDR: CCF9-E8-B1C10A
Phone SN: R23B959779
All code change to -> 00000000
If phone lock enter code -> 00000000
Unlock - ok
Elapsed time: 8 second, sw ver: 3.5.0040

Unlocking instruction:-
Read More

Saturday, December 24, 2016

SAMSUNG J510FN,J510GN UNLOCKING NOW POSSIBLE

6:46:00 PM 10
Hello viewers your waiting is now end,Samsung J510GN and J510FN unlocking is possible.

Samsung Tool PRO 27.6 Update. Xmas gift Update  First in the world.




Added addition function:

PATCH cert for all known Firmware at this moment for:

Read More

Friday, December 23, 2016

SAMSUNG SM-G532G UNLOCKING & INSTRUCTION HERE

12:09:00 PM 2
Samsung Sm-G532G ( Samsung J2 Prime ) unlock info with log here.




















Here the log is:-


Operation: Read Codes
Selected model: SM-G532G
Software version: 27.5

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532G
Android version: 6.0.1
Product code: SM-G532GZDDXME
Phone version: G532GDXU1APJ2
PDA version: G532GDXU1APJ3
CSC version: G532GOLB1APJ4
CSC country code: MALAYSIA
CSC sales code: XME
HW version: MP 0.300
Phone SN: R58HB1KX90Z
Chip name: MT6737T
Modem board: MT6737T
RF cal date: 20161108
IMEI:
Checking Super user right... true
Reading security... OK
Please wait, calculating codes... OK (time - 00:00:09)
Freeze code: 49181425
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 17182059
For check lock status: *#7465625#

Done with Samsung Tool PRO v.27.5


Here the image is:-





Must know:-


  • Battery must be 50% over charged.


  • Install driver properly.


  • Root the phone manually,auto root function is not working at all.


  • After insert sim phone ask for PUK code then insert Freeze code.


  • Restart phone phone ask for network key then insert CP lock code.
Here you can download root file here.

This file is password protected so contact us from our contact us page

Mail us for..

Password- thegsmsolution.blogspot.comfor you

Type password without space.




Read More

Thursday, December 22, 2016

iPhone 5S battery draining fast while phone on standby.

12:14:00 PM 0
iPhone 5S heat and battery draining fast solution with detailed info.

Hello viewers,

We are going to give detailed info about iPhone 5S battery draining.

Why this happen let`s us describe.

Such type of fault cause due to copy charger and copy charging flex .

Problem:-

Battery charge is going to fast and after finished full charge on the battery,phone is not charging to til new battery.

1 minute = 1% battery decrease.

Battery draining while on standby.

Battery also draining while mobile is switch off condition.

First you have to try

loading  new IOS  ,put new battery,change flex charging,cleaned full logic board and then no luck.

Next you have to check all the capacitor surrounding U2 I.C. There is less chances of that i.c is ok.


Actually that is the faults of U2 I.C .


Here you can see the location of that ic.




After remove this I.C seen just like that.





Caution:-


  • You must need Highly skills to be able to replace this chip.
  • You have to place on there right position.
  • Small component is near these i.c so be careful slightly,mistakes makes phone to dead permanently.
  • These solution is tested on so many iPhone.
  • Try at your own risk,no responsible for further damage.
Further help you need interact with us by our contact us page.
Read More

Monday, December 19, 2016

SAMSUNG SM-J710GN UNLOCKING DETAILED INFO

3:05:00 PM 0
Samsung SM-J710GN unlocking proof with image & log.

Here the image




Here the log is:-



  UNLOCK INSTRUCTIONS:

    To unlock NEW security type:

Read More

SAMSUNG SM-G935F UNLOCKING INSTRUCTION & DETAILED INFO HERE

2:58:00 PM 0
Samsung  S7 EDGE (SM-G935F) unlocking detailed info and instruction with log.










Here the image is:-





Here is the log.


  UNLOCK INSTRUCTIONS:

  To unlock NEW security type:

Read More

Monday, December 12, 2016

All Samsung marshmallow frp bypass new method

12:10:00 PM 0
New method for FRP bypass.

Hello viewers we are going to present new method of FRP bypass,all old method are if failure you have to try this it`s working well and tested on many Samsung phone.






Here the process is read carefully.

Take two sim card one sim is pin code activate and another is normal but working sim and insert into mobile.

Download FRP remove file .

Download - rootjunky.frpbypass.



Download - sika524.android.quickshortcut



Extract it and copy to memory card and insert it to phone.

Read More

Saturday, December 10, 2016

SAMSUNG G570F UNLOCKING 100% SUCCESS

6:20:00 PM 2
Unlocking Samsung G570F ( Samsung J5 Prime )

Here is the image for proof:-

















The different site shows fake video and sim process for unlocking. Don`t be panic here we are going to show how to unlock that model in a simple way.You have to root the mobile.

Here is the log:-

Read More

iPhone common repair mistakes that you have to know

3:05:00 PM 0
The common cause due to simple mistake.


We are going to describe the common mistake happen that may cause a massive problem in iPhone especially iPhone 5, iPhone5S and iPhone5C that fault is while power on apple logo shows and blue display and sometime red one and another fault cause duo to.

You have to read detailed so you have got a knowledge how and why such type of common fault actually happen on iPhone and runs towards the end of iPhone.

Some important things you have to remember.


Screw model










As a mobile phone repair technician we have to knowledge about how to all the parts as well as screwing process.Some time a simple mistake makes the great problem.So,the length of screw is most important in iPhone especially protection cap over display connector.There is four screw on the cap but two one is important which was fixed on the Pcb for screw holder,if you use long screw the circuit of Pcb board was broken.It is so hard to repair,so you have to use digital microscope.

Hints- Always use right screw to fix board on Pcb.

Changing lcd.

Another common mistake while installing display on pcb always aware about that battery must be remove from pcb,if you don`t do that the light circuit might be damage or may be burn.
Why it happen let`s discuss.
While power on device the high frequency and high voltage above (25-30) volt going on lcd for lcd led glow,as a result high voltage may cause damage.

Home button.


iPhone 5s have a finger sensor that you know but you have also know that if the original sensor came on phone is so important because the board id and sensor id might be match to fully function the finger sensor .Otherwise the finger sensor function is fully function less rather you change another original touch id from another phone or new one.

Charging flex





Another important things while changing charging flex that you brought from which was not use protection compound that may cause massive voltage goes without control then result heating power IC,the phone use U2 IC to control the voltage but regular use of such type of copy flex makes your phone die slowly.The user might be aware about that.

Data cable.





Always use original data cable like as a original flex apple design the over voltage control IC fixed in a data cable,while you use a copy data cable no any protection,direct voltage goes on Pcb may result heating problem and iPhone is going slowly impact near dead.

Charger






We saw here man is going to need busy day by day and no time for charging phone in a right manner,the market has also product fast charging system by increase the amp of charger belong this the output voltage is far more high then the phone need.That is so bad for phone user which cause phone to die slowly.
Always use original charger provide with phone especially on apple product.


Charging time.

Charging time also important you have to charge device while battery is about less then 5% then charge fully,time and time charge makes your battery near to damage also know that more and more charge makes your device near to damage and also a charging system failure anymore.


So how to manage your device,in your hand so keep in mind that things your device run fully functioning ever as a new one.We have research on it why such a common fault happen and all the phone user have on a problem and give more time to service center to repair your gadget.I follow this rule surely says that i have iPhone 5 from 3 years without problem running till as a old model i have plan to sell hehehehehehehhe.
Read More

BLACKBERRY BLINKING RED LIGHT SOLUTION

2:51:00 PM 0
Blackberry solution for blinking red light 100% working


Blinking red light solution for all blackberry

New and tried on 100s off  BB modules success on all

1. Download blackberry master control program and install it

2. Download CFP_3.9.0.175.exe keep on desktop

3. Open master control program and click on setting wheel on left hand side and
in enable protected control type Brick Berry same as it is here

4. Right click on alien face CFP button at left hand side.

5. Below in CFP option (rim command-line program (CFP) executable ) select the CFP which you copied on desktop.

6.Connect your BB without battery on top command-line interface (CLI)
select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your BB install a battery and wait for few minutes let the phone do its job.
let the bb master control be open..........



Now the trick is to load OS

 In BB master control on right hand side below right click on app loader
it will loader/no Jvm connect your phone follow the instruction that`s it you have done the job..



If gives you error again go to step 6 select nuke and then wipe after this if says error don`t cancel the procedure just disconnect the phone remove the battery re insert and wait until the phone finish then connect the phone and press retry



Read More

Friday, December 9, 2016

SAMSUNG J320F UNLOCKING & INSTRUCTION HERE

1:16:00 PM 0
Samsung J320F unlocking process with log here.


  UNLOCK INSTRUCTIONS:

  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
 

steps:

1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.



Log here.

Operation: Read Codes
Selected model: SM-J320F
Software version: 27.4

Searching Samsung modem... detected COM123
Reading phone info... Ok
Model: SM-J320F
Version: J320FXXU0APG1/J320FOJV0APG2/J320FXXU0APG1/J320FXXU0APG1
Product code: SM-J320FZWDKSA
Phone SN: R58HA1P2A8K
IMEI: 35437308087****
Unique number: CQN008C1CE4D683
Reading codes... Ok
Please wait, calculating codes... OK (time - 00:01:51)
Freeze code: 73081738
NET lock: 15714842
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.27.4

No need root not any violation of warranty and security.

Thanks z3x team.

Read More

Thursday, December 8, 2016

SC-05D UNLOCKING HERE WITH DETAILED INFO

1:43:00 PM 0
How to unlocking Samsung SC-05D (Ntt docomo ) also known as Samsung Galaxy Note1 Provide by japan.


UNLOCK INSTRUCTIONS:

Here is two unlocking method throw.

    Micro-UART cable:
  1. Phone must be powered on.
  2. Type *#7284# and choose Modem for UART and PDA for USB options.
  3. Type *#9090# and choose UART.
  4. Reboot phone.
  5. Connect the phone to UART port.
  6. Choose correct COM port in port settings.
  7. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Read More

GIONEE M5 PLUS Firmware Flash file (Stock Rom) FREE

12:57:00 PM 0
Gionee M5 plus firmware download .


Below you can get the direct link to download the Gionee m5 plus stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE M5 LITE Firmware Flash file (Stock Rom) FREE

12:56:00 PM 0
Gionee M5 LITE firmware download .


Below you can get the direct link to download the Gionee m5 lite stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE M3 Firmware Flash file (Stock Rom) FREE

12:54:00 PM 0
Gionee M3 firmware download .


Below you can get the direct link to download the GIONEE M3  stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the USB driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the USB cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE M5 Firmware Flash file (Stock Rom) FREE

12:52:00 PM 0
Gionee M5 firmware download .


Below you can get the direct link to download the Gionee M5 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE M5 MINI Firmware Flash file (Stock Rom) FREE

12:51:00 PM 5
Gionee M5 mini firmware download .


Below you can get the direct link to download the Gionee m5 mini stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P2M Firmware Flash file (Stock Rom) FREE

12:50:00 PM 0
Gionee P2M firmware download .


Below you can get the direct link to download the Gionee P2M stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P3 Firmware Flash file (Stock Rom) FREE

12:48:00 PM 0
Gionee P3 firmware download .


Below you can get the direct link to download the Gionee P3 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P6M Firmware Flash file (Stock Rom) FREE

12:47:00 PM 0
Gionee P6M firmware download .


Below you can get the direct link to download the Gionee P6M stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE S5.5 Firmware Flash file (Stock Rom) FREE

12:46:00 PM 0
Gionee S5.5 firmware download .


Below you can get the direct link to download the Gionee S5.5 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P2S Firmware Flash file (Stock Rom) FREE

12:44:00 PM 0
Gionee P2S firmware download .


Below you can get the direct link to download the Gionee P2S stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

Wednesday, December 7, 2016

iPhone4s heating when sim inserted solution here.

2:09:00 PM 0
iPhone 4S heating while searching network.

Here we are going to describe how to repair such a faults,while takeout sim all working fine no heat but while you insert sim the iPhone goes on heating.That is the fault of network related compound which was going to be describe here briefly.

Here is the image you have to note the compound which may causes such like of faults.






Here we are going to show which parts you have to check faults.You have to notice first green highlight component  (C46_RF) check for shorting.It`s simply a capacitor that should not be short.If short remove and replace it because it may cause signal loss, result low network.

Read More

GIONEE S5.1 Firmware Flash file (Stock Rom) FREE

12:20:00 PM 0
Gionee S5.1 firmware download .


Below you can get the direct link to download the Gionee S5.1 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P6 Firmware Flash file (Stock Rom) FREE

12:19:00 PM 0
Gionee P6 firmware download .


Below you can get the direct link to download the Gionee P6 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P5W Firmware Flash file (Stock Rom) FREE

12:17:00 PM 0
Gionee P5W firmware download .


Below you can get the direct link to download the Gionee P5W stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P5 MINI Firmware Flash file (Stock Rom) FREE

12:16:00 PM 0
Gionee P5 mini firmware download .


Below you can get the direct link to download the Gionee P5 mini stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P4S Firmware Flash file (Stock Rom) FREE

12:14:00 PM 0
Gionee P4S firmware download .


Below you can get the direct link to download the Gionee P4S stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE P3S Firmware Flash file (Stock Rom) FREE

12:12:00 PM 0
Gionee P3S tested firmware download .


Below you can get the direct link to download the Gionee P3S stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More

GIONEE S6 Firmware Flash file (Stock Rom) FREE

12:10:00 PM 0
Gionee S6 firmware download .


Below you can get the direct link to download the Gionee S6 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is not password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here you have to know about the boot key

Read More